Configure the ELITEpro XC as its own wifi hotspot and view real-time data using a wifi-enabled smartphone, laptop, or tablet.
Energy Usage and Climate Normalized Data - All from One Instrument
The ELITEpro XC is a complete solution for pinpointing electric usage and recording building performance metrics. It is capable of measuring, storing, and analyzing electrical consumption data which is derived from the voltage and current inputs. The ELITEpro XC uses direct connections to each phase of the voltage and various interchangeable CT options such as split-core current transformers, or flexible RoCoils (for large loads or large cables and bussbars) to monitor current on each phase.
NEW! Analog Input Channels: Correlate Your Consumption with Environmental Conditions and More!
New to the ELITEpro XC are 4 analog input channels which can be configured for voltage or current input used in any combination among channels. Analog inputs are especially helpful when used in conjunction with power measurements to correlate the consumption of electricity with environmental, HVAC plant performance, or other process conditions. Typical uses might include logging ambient temperature, building temperatures, solar insolation, tank pressures, duct flows, etc. Obtain this valuable normalized data using just one meter: The ELITEpro XC.
These meters can capture kWh/kW energy and demand data as well as virtually all relevant energy parameters for diagnostics and monitoring on three-phase or single-phase circuit installations. Electrical load diagnostic parameters, such as power factor (both Apparent and Displacement), are captured in addition to energy and demand values.
The ELITEpro XC's flexibility, size, and ease-of-use make them ideal tools for gathering detailed consumption information in commercial, industrial, government, and retail environments.
STANDARD ETHERNET PORT
Every ELITEpro XC instrument now includes an Ethernet port in addition to the standard USB. Connect directly to the ELITEpro XC via the included A-to-B USB cable. Or, have the ELITEpro XC on your local area network for convenient remote data download. Supports 10/100 MB Ethernet over Cat 5 or better and can be configured for DHCP or static IP. Schedule automatic data downloads from the logger using AutoPoll software (included with ELOG). Reconfigure the ELITEpro XCfor a new project without leaving your workstation. View Ethernet Performance Update here.
OPTIONAL BLUETOOTH® WIRELESS TECHNOLOGY
Save time and meet safety requirements by communicating with an ELITEpro XC without removing the electrical panel door. In addition to the standard USB and Ethernet ports, ELITEpro XC instruments may be equipped with an optional Bluetooth® wireless technology interface, which will allow a Bluetooth-enabled PC running ELOG to connect to the ELITEpro XC over short distances (up to 100 feet, depending on interference) to send setup tables or download data. Includes USB and Ethernet ports. Bluetooth-enabled PC must support Serial Port Profile (SPP). View Bluetooth® Performance Update here.
OPTIONAL WI-FI INTERFACE
Need a meter on your local area network but do not have a network connection near by? The ELITEpro XC's optional Wi-Fi interface allows the meter to be connected to a Wi-Fi network and accessed from any PC on the network using ELOG software. Alternatively, configure the ELITEpro XC as its own Wi-Fi hotspot and view real-time data using a Wi-Fi enabled PC, tablet, or smart phone via a web browser from up to 150 ft away. Available as two separate models*: with an internal antenna or with an external antenna. Includes USB and Ethernet ports. View Wi-Fi Performance Update here.
*Note: ELITEpro XC loggers that are equipped with a Wi-Fi package contain an internal antenna. An external antenna is optional. You may toggle between using the internal and external antenna (if it is available on your logger) by checking or unchecking the Use External Antenna checkbox in ELOG.